Temperature Transmitter

GENERAL INFORMATION

Temperature transmitter is an electronic device used to send a temperature measurement over two wires to the processing unit. The transmitter is responsible for converting the small electrical signal from the temperature sensor into a more readable signal for the processing unit.

BRIEF INTRODUCTION

The temperature sensor is integrated with the conversion circuit, which not only saves expensive compensation wires but also reduces signal transmission loss and improves the anti-interference ability during long-distance signal transmission. Linearization correction function, thermocouple temperature transmitter has cold end temperature compensation.

ADVANTAGES

-Thermocouple: K, E, J, T, S, B RTD: Pt100, Cu50, Cu100.
-Load Resistance: 0～500Ω.
-Power Supply: 24VDC; Battery.
-Environment Temperature: -40～85℃.
-Environmental Humidity: 5～100%RH.
-Installation Height: Generally L-l=(50~150)mm. When the measured temperature is high, L-l should be increased appropriately. (L is the total length, and l is the insertion length).

MAIN SPECIFICATIONS

Sensing Element	J,K,E,T,Pt100,Cu50 tempertature sensor
Material	SS304; SS316; SS316L
Temperature Range	-200℃~+600℃
Accuracy	±0.5%; ±1.0%
Output	4-20mA 2 wires
Communication	HART
Power Supply	24V DC (12-36V)
Diameter of Protect Tube	Stainless steel Φ16mm,Φ20mm(optional)
Insert Length (L)	30mm＜L＜500mm
Electrical Connector	Terminal block,DIN(IP65)