Electromagnetic Flowmeter
Product categories
Electromagnetic Flowmeter
GENERAL INFORMATION
An intelligent electromagnetic flow meter consists of two parts: the sensor and the converter. It is based on Faraday’s law of electromagnetic induction and is used to measure the flow volume of conductive liquids with conductivity higher than 5μS /cm. It can also measure the volume of evenly distributed suspension liquid, such as strong corrosive liquids, slurries, etc. After setting the density, it can also measure the mass flow of conductive liquid, widely used for industrial purposes (petroleum, chemical, metallurgy, textile, paper, environmental protection, food, etc.), municipal management, water conservation construction, river dredging, and other fields of flow measurement.
BRIEF INTRODUCTION
Electromagnetic flowmeters are high-precision instruments that leverage Faraday’s Law of Electromagnetic Induction to accurately measure the flow of conductive liquids. By generating a magnetic field across the flow pipe, these devices detect voltage changes proportional to fluid velocity, providing an obstruction-less, low-maintenance solution with minimal pressure drop. Engineered for reliability and versatility, they are widely deployed across industries such as water and wastewater treatment, chemical processing, mining, and the food and beverage sector.
ADVANTAGES
- Various connection methods
- Wide turn-down ratio
- Varies connection standard
- Multiple liner material options
- Various electrode material options
- Various output/input signals: Analog current, frequency, pulse.
- Explosion-proof certification: Support Exd ib MB II BT4 Gb.
MAIN SPECIFICATIONS
| Diameter | DN3-DN2000 |
| Electrode Material | SS316L, Hb, Hc, Ti, Ta, Pt |
| Liner Material | Hard rubber, Polyurethane, PTFE, F46, PVDF, PEEK, Tefzel |
| Medium Conductivity | > 5 μs/cm as default |
| Accuracy | ±0.5% of rate; ±0.2% optional |
| Velocity Range | 0.3-12m/s |
| Ambient Temperature | -20℃ ~ +60℃ |
| Medium Temperature | Rubber: ≤80℃; PTFE & F46: ≤120℃; PFA: ≤180℃ |
| Nominal Pressure | 0.6MPa ~ 4.0MPa (according to caliber or special order) |
| Protect Level | IP65, IP67, IP68 (remote type) |
| Output | Pulse, 4-20mA, flow rate alarm |
| Communication | Modbus, HART, Profibus DP |
| Power Supply | 24V DC, 220V AC, Battery |
| Structure | Compact Type, Remote Type |
| Process Connection | Flange (DIN, ANSI, JIS etc.); Flange Wafer Type; Sanitary Tri-clamp Type; Thread Type; Insertion Type |
| Body Material | Carbon Steel, SS304 (SS316 as optional) |
MAIN SPECIFICATIONS (MINI-TYPE)
| Diameter | DN3-DN20 |
| Electrode Material | SS316L, Hb, Hc, Ti |
| Liner Material | PEEK |
| Medium Conductivity | ＞5 μs/cm as default |
| Accuracy | ±0.5%~±1.0% of rate |
| Velocity Range | 0.3-10m/s |
| Ambient Temperature | -20℃ ~ +60℃ |
| Medium Temperature | -20℃ ~ +100℃ |
| Nominal Pressure | 0.6MPa ~ 1.6MPa |
| Protection Level | IP65, IP67 (Blind) |
| Output | Pulse |
| Communication | RS485 |
| Power Supply | 24VDC±20% (19.2V-28.8V) |
| Structure | Compact Type |
| Process Connection | Threaded, G1/2, G3/4, NPT 1/2 or others, SS304/SS316 |
| Body Material | Aluminum with epoxy coating |
| Current Consumption | ＜150mA |
| Dimension (H×W×D) | 150×100×70(mm) |
PRODUCT PHOTOS
